Allied Telesis AT-UWC Series - Manual (Page 70)

AT-UWC WLAN Controller Web GUI User’s Guide
70
3. Click Submit.
The change is saved to the running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Local UDP Port Displays the UDP port number used to sent log
messages to syslog servers. The default port
number is 514.
Messages Received Displays the number of log messages that the
process received, including discarded messages.
Messages Dropped Displays the number of log messages that have
an error or were discarded due to lack of space.
Messages Relayed Displays the total number of log messages that
were sent to syslog servers. If a message is sent
to three syslog servers, the message is counted
three.
Table 12. Syslog Configuration (Continued)
Field Description