Allied Telesis AT-UWC Series - Manual (Page 320)

AT-UWC WLAN Controller Web GUI User’s Guide
320
5. When you select WEP the Security field, the page adds the following
fields shown in Figure 159.
6. If you select WPA/WPA2, go to step 8.
Figure 159. Wireless Network Configuration - WEP Page
7. Specify the relevant fields described in Table 135.
Table 135. Wireless Network Configuration - WEP
Field Description
Security Displays the WEP selection.
Select one of the WEP types. The options are:
 Static WEP - Uses the WEP key
specified manually to the access point
and AP clients.
 WEP IEEE802.1x- Uses the WEP key
generated dynamically to the access
point and AP clients. It requires a
RADIUS server.
When Static WEP is Selected
Authentication Select either or both of the Authentication types.
The options are:
 Open System - No authentication.
 Shared Key- Authenticated with the
shared key. Security can be weaker than
Open System.
 Both - The AP client with a valid WEP
key can connect to the access point. The
AP client specified using the open
system can connect to the access point.