Allied Telesis AT-UWC Series - Manual (Page 228)

AT-UWC WLAN Controller Web GUI User’s Guide
228
4. If you want to refresh the display, click Refresh.
Viewing IP
Discovery
To view the information about communication between the WLAN
Controller and access points or peer controllers, do the following:
1. From the Navigation pane, go to WLAN > Status/Statistics and click
the IP Discovery tab.
The Wireless Discovery Status page is displayed as shown in
Figure 118.
Figure 118. Wireless Discovery Status Page
2. Observe the fields described in Table 82.
WLAN Packets
Receive Dropped Displays the total number of packets that all the
access points managed by WLAN Controller have
received but discarded.
Table 81. Controller Status/Statistics (Continued)
Field Description
Table 82. Wireless Discovery Status
Field Description
Maximum
Number of
Configurable
Entires Displays the maximum number of IP addresses
that the WLAN Controller can register for IP
discovery. These IP addresses are in the IP List.
See “WLAN Basic Setup > Discovery” on
page 194.