Allied Telesis AT-UWC Series - Manual (Page 164)

AT-UWC WLAN Controller Web GUI User’s Guide
164
Interface Status
From the Interface Activation Status page, you can view the information
about the wireless network interface that is associated to a CP profile.
Viewing the
Interface
Activation Status
To view the information about Captive Portal, do the following:
1. From the Navigation pane, go to System > Captive Portal > Interface
Status.
The Interface Activation Status page is displayed as shown in
Figure 91.
Figure 91. Interface Activation Status Page
2. Select a CP profile from the select list.
3. Select a wireless network interface from the select list.
4. Observed the fields described in Table 51.
Table 51. Interface Activation Status
Field Description
Activation Status Displays the status whether Captive Portal to the
wireless network interface is enabled or disabled.
Disable Reason Displays the reason when Captive Portal is disabled
to the wireless network interface. The options are:
 Interface Not Attached
 Disabled by Administrator