Allied Telesis AT-UWC Series - Manual (Page 141)

Chapter 4: Security
141
3. If you want to view the most current information, click Refresh.
Adding or Modify
a CP Profile
To add or modify a CP profile, do the following:
1. From the Navigation pane, go to Security > Captive Portal > CP
Configuration.
The CP Summary page is displayed as shown in Figure 79 on page
140.
2. Perform one of the following steps.
 To add a new CP profile, click Add.
 To modify an existing CP profile, click one of the name of the CP
profile that you wan to modify.
The CP Configuration page is displayed as shown in Figure 80 on
page 142.
Verification Displays the verification type of the CP profile. The
options are:
 Guest - No verification is implemented.
 Local - Verification is implemented on the
specified local users.
 RADIUS server - Verification is implemented
by the RADIUS server.
Languages Displays the number of languages for the welcome
page specified to the CP profile.
Table 39. CP Summary (Continued)
Field Description