Allied Telesis AT-UWC Series - Manual (Page 226)

AT-UWC WLAN Controller Web GUI User’s Guide
226
2. Select the IP address of the WLAN Controller that you want to view the
status and statistics.
The status and statistics about the selected WLAN Controller is
displayed.
Note
To view the status and statistics about other WLAN Controllers, your
local WLAN Controller must be the cluster controller.
3. Observe the fields described in Table 81.
Table 81. Controller Status/Statistics
Field Description
Total Access
Points Displays the total number of the following access
points:
 Managed Access Points
 Connection Failed Access Points
 Discovered Access Points.
Managed Access
Points Displays the number of access points that are
successfully authenticated and actively connected
to the WLAN Controller.
Discovered
Access Points Displays the number of access points that are
discovered or Authenticated, but not configurated
completely.
Connection
Failed Access
Points Displays the number of access points that were
authenticated before, but are not currently
connected to the WLAN Controller.
Maximum
Managed Access
Points Displays the maximum number of access points
that WLAN Controller manages.
WLAN Utilization Displays the utilization of the wireless network by
the access points managed by the WLAN
Controller.
Total Clients Displays the total number of the following AP
clients:
 Associated AP clients
 Authenticated AP clients
 Disassociated AP clients