Allied Telesis AT-UWC Series - Manual (Page 238)

AT-UWC WLAN Controller Web GUI User’s Guide
238
5. If you want to refresh the display, click Refresh.
Viewing the
Status of
Neighbor AP’s
To view the information about neighbor access points, do the following:
1. From the Navigation pane, go to WLAN > Status/Statistics > Managed
AP and clicked the Neighbor APs subtab.
The Managed Access Point Neighbor AP Status page is displayed as
shown in Figure 123 on page 239.
Manual Channel
Adjustment
Status Displays information about manually applying the
channel plan. The options are:
 Not Started
 Requested
 In Progress
 Success
 Failure
WLAN Utilization Displays the utilization of the wireless network by
the managed access points.
Authenticated
Clients Displays the number of authenticated AP clients
per radio band.
Transmit Power Displays the current transmitting power.
Fixed Power
Indicator Displays whether the power is manually assigned
or not. To fix the power, see “WLAN Basic Setup >
Valid AP” on page 198.
Manual Power
Adjustment
Status Displays information about the power adjustment
that is manually requested. The options are:
 None
 Requested
 In Progress
 Success
 Failure
Total Neighbors Displays the number of access points and AP
clients that are detected by the RF scan.
Table 86. Managed Access Point Radio Status Detail (Continued)
Field Description