Allied Telesis AT-UWC Series - Manual (Page 40)

AT-UWC WLAN Controller Web GUI User’s Guide
40
ARP Cache
From the ARP Cache page, you can view and clear the Address
Resolution Protocol (ARP) cache. ARP stores map entries in the ARP
cache to map IP addresses to MAC addresses. Clear the ARP cache
when it may be corrupted or damaged.
To view and clear the ARP cache, do the following:
1. From the Navigation pane, go to System > ARP Cache.
The ARP Cache page is displayed as shown in Figure 26.
Figure 26. System ARP Cache Page
2. Observe the ARP cache.
3. Click the following buttons as needed:
 Refresh — Refreshes the display on this page.
 Clear — Delete all entries in the ARP Cache.