Allied Telesis AT-UWC Series - Manual (Page 76)

AT-UWC WLAN Controller Web GUI User’s Guide
76
4. Click one of the following buttons:
 Delete — Deletes the selected SNMP trap receiver.
 Submit — Saves the changes to the running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
IP Address Specifies the IP address of the SNMP trap receiver.
Status Displays the status of the trap receiver. The options
are:
 Enable
 Disable
Table 14. SNMP Trap Receiver Configuration (Continued)
Field Description