Allied Telesis AT-UWC Series - Manual (Page 69)

Chapter 2: System
69
Syslog Configuration
From the Syslog Configuration page, you can start or stop sending log
messages to Syslog servers.
Note
To set Syslog servers, see “Hosts Log Configuration” on page 63.
To start or stop sending log messages to Syslog servers, do the following:
1. From the Navigation pane, go to System > System > Logs > Syslog
Configuration.
The Syslog Configuration page is displayed as shown in Figure 41.
Figure 41. Syslog Configuration Page
2. Select the options in the fields described in Table 12.
Table 12. Syslog Configuration
Field Description
Admin Status Starts or stops sending messages to syslog
servers. The options are:
 Enable: Starts sending log messages to
Syslog servers.
 Disable: Stops sending log messages to
Syslog servers.