Allied Telesis AT-UWC Series - Manual (Page 327)

Chapter 5: Wireless LAN
327
Modifying An
Access Point
Profile
To modify an access point profile, do the following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
AP Profiles.
The Access Point Profile List page is displayed as shown in Figure 161
on page 325.
2. Click the name of the profile that you want to modify the properties.
To configure the AP profile, go to “Access Point Profile Global
Configuration” on page 328.
Deleting An
Access Point
Profile
To delete an access point profile, do the following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
AP Profiles.
The Access Point Profile List page is displayed as shown in Figure 161
on page 325.
2. Check the checkbox of the profile that you want to delete.
3. Click Delete.
The AP profile is deleted.
Applying An
Access Point
Profile
To apply an access point profile, do the following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
AP Profiles.
The Access Point Profile List page is displayed as shown in Figure 161
on page 325.
2. Check the checkbox of the profile that you want to apply.
3. Click Apply.
The access points associated to the profile reboot.