Allied Telesis AT-UWC Series - Manual (Page 304)

AT-UWC WLAN Controller Web GUI User’s Guide
304
3. Click the following buttons as needed:
 Refresh — Refreshes the display on this page.
 Submit — Makes the changes effective and saves them to the
running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Base IP Port Specify the base port. The WLAN Controller sends
packets out of a port from the range between the
number of the base port and the number of the
base port plus 9. The default base port is 57775.
For example, by default, the WLAN Controller
sends packets out of a port between 57775 and
57784.
When you change the base IP port of the WLAN
Controller, you must change the base IP port of
access points and peer controllers.
Table 128. Wireless Global Configuration (Advanced) (Continued)
Field Description