Allied Telesis AT-UWC Series - Manual (Page 240)

AT-UWC WLAN Controller Web GUI User’s Guide
240
5. Click the following buttons as needed:
 Delete All Neighbors — Deletes all the entires on the Managed
Access Point Neighbor AP Status and Managed Access Point
Neighbor Client Status pages.
 Refresh — Refreshes the display on this page.
Viewing the
Status of
Neighbor Clients
To view the information about neighbor AP clients, do the following:
1. From the Navigation pane, go to WLAN > Status/Statistics > Managed
AP and clicked the Neighbor Clients subtab.
The Managed Access Point Neighbor Client Status page is displayed
as shown in Figure 124 on page 240.
Figure 124. Managed Access Point Neighbor Client Status Page
2. Select the MAC address of the access point that you want to view the
neighbor AP client information.
3. Select the radio band: 802.11b/g/n or 802.11a/n.
The neighbor AP client information on the selected access point is
displayed.
Age Displays the time period since the neighbor access
point was detected through the RF scan.
Table 87. Managed Access Point Neighbor AP Status (Continued)
Field Description