Allied Telesis AT-UWC Series - Manual (Page 321)

Chapter 5: Wireless LAN
321
8. When you select WPA/WPA2 the Security field, the page adds the
following fields shown in Figure 160.
Figure 160. Wireless Network Configuration - WPA/WPA2 Page
9. Specify the relevant fields described in Table 136 on page 322.
WEP Key Type Select the one of the WEP key type. The options
are:
 ASCII - A WEP key is generated from
ASCII characters.
 HEX - A WEP key is generated from Hex
decimal numbers.
WEP Key Length (bits) Select the WEP key length in bits. The options
are:
 64bits
 128bits
WEP Keys Specify four keys and select one of the keys. To
communicate with an AP client, it must have the
same key specified in this field.
WEP IEEE802.1x is Selected
Bcast Key Refresh
Rate Specify time period in seconds to update the
broadcast group key for the AP clients
connected to the valid access points. The range
is 0 to 86400 seconds.
Session Key Refresh
Rate Specify time period in seconds to update the
unicast key for the AP clients connected to the
valid access points. The range is 30 to 86400
seconds.
Table 135. Wireless Network Configuration - WEP
Field Description