Allied Telesis AT-UWC Series - Manual (Page 102)

AT-UWC WLAN Controller Web GUI User’s Guide
102
Trap Logs
From the Trap Logs page, you can view information about traps and a list
of traps that the WLAN Controller has generated.
To view trap logs, do the following:
1. From the Navigation pane, go to System > Trap Manager > Trap Logs.
The Trap Logs page is displayed as shown in Figure 59.
Figure 59. Trap Logs Page
2. Observe the fields described in Table 24.
. Table 24. Trap Logs
Field Description
Number of Traps
Since Last Reset Displays the number of traps that the WLAN
Controller has generated since the log was
cleared.
Trap Log Capacity Displays the maximum number of traps that the
system can log. When reaching the Trap Log
Capacity, the system replaces a new trap entry
with the oldest trap entry.
Number of Traps
Since Log Last
Viewed Displays the number of traps that have been
generated since the last time the Trap Logs page
was viewed. When the page is viewed using a
web browser, the number is reset.
Log Displays the sequence number of the trap log.
System Up Time Displays the time when the trap is generated.