Allied Telesis AT-UWC Series - Manual (Page 21)

Chapter 1: Getting Started
21
Changing the IP Address
When you access the AT-UWC WLAN Controller from the management
workstation, it must have an IP address form the same network as the
AT-UWC WLAN Controller server.
The procedures for changing the IP address is slightly different among
Windows Operating Systems. The following is the procedures using
Windows 7 as an example.
To change the IP address of a PC installed on Windows 7, do the
following:
1. Click Control Panel from the Start button.
The control panel appears as shown in Figure 7.
Figure 7. Control Panel
2. Click Category at the upper right corner of the window and select
Large icons.
Control Panel displays items with large icons as shown in Figure 8 on
page 22.