Allied Telesis AT-UWC Series - Manual (Page 207)

Chapter 5: Wireless LAN
207
3. Click Submit.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Power Threshold
(dBm) Specifies the RF power threshold. The access
points managed by the WLAN Controller adjust
the RF power using the power threshold.
For example, access point 1 transmits the RF
and other access points detect the RF from
access point 1. Among the other access points,
access point 2 detects the highest level of RF
power from access point 1. When access points
1 and 2 are using the same channel and the RF
level that access point 2 detects is greater than
the power threshold, the power threshold of
access point 2 is lowered by 5%.
Table 72. RF Configuration (Continued)
Field Description