Allied Telesis AT-UWC Series - Manual (Page 302)

AT-UWC WLAN Controller Web GUI User’s Guide
302
WLAN Advanced Configuration > Global
From the WLAN Advanced Configuration page, you can modify the
advanced settings including the settings of a peer group.
One WLAN Controller can manage up to 210 access points; however, to
manage more than 210 access points in a large network, you must create
a peer group of WLAN Controllers. One peer group can consists of up to
64 WLAN Controllers.
To modify the advanced settings, do the following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
Global.
The Wireless Global Configuration (Advanced) page is displayed as
shown in Figure 150.
Figure 150. Wireless Global Configuration (Advanced) Page
2. Modify the settings described in Table 128.
Table 128. Wireless Global Configuration (Advanced)
Field Description
Peer Group ID Specify the ID of a peer group that the WLAN
Controller belongs to. The WLAN Controllers with
the same Peer Group ID are called a peer group or
cluster. One peer group can have up to 64 WLAN
Controllers.