Allied Telesis AT-UWC Series - Manual (Page 163)

Chapter 4: Security
163
The information about the CP profile displayed.
4. Observe the fields described in Table 50.
5. Click the following buttons as needed:
 Block — Blocks the network access via Captive Portal.
 Unblock — Cancels the blocking.
 Refresh — Refreshes the display on this page.
Table 50. CP Activation and Activity Status
Field Description
Operational
Status Displays the status whether the CP profile is
enabled or disabled.
Disable Reason Displays the reason when the CP profile is disabled.
The options are:
 No display - The CP profile is enabled.
 Administrator Disabled
 RADIUS Authentication mode enabled,
but RADIUS server is not defined.
 Not associated with any interfaces
 The associated interfaces do not exist or
do not support the CP capability.
Blocked Status Displays the CP authentication blocking status. The
options are:
 Block - Users cannot access the network
via Captive Portal authentication. Click
Block to block the network access via
Captive portal.
 Unblock - Users can access the network via
Captive Portal authentication. Click
Unblock to cancel blocking.
Authenticated
Users Displays the number of authenticated users who
are currently using Captive Portal.