Allied Telesis AT-UWC Series - Manual (Page 337)

Chapter 5: Wireless LAN
337
6. Click the following buttons:
 Refresh — Refreshes the display on this page.
 Clear — Clears the changes you made before clicking Submit.
 Submit — Makes the changes effective and saves them to the
running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Multicast Tx Rate
(Mbps) Specifies the rate of multicast transmission in
Mbps.The rate is also applied to broadcast and
beacon transmissions. When the rate is set to
Auto, the lowest basic rate is applied.
The options for 802.11b/g/n are:
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54.
The options for 802.11a/n are:
6, 9, 12, 18, 24, 36, 48, or 54.
Supported
Channels Auto
Eligible Specifies the channels that are used for the
automatic channel assignment. When the
checkbox is checked, the channel is eligible for
the automatic channel assignment.
Available MCS Indices Specifies selected data rates. The index numbers
are associated with the IEEE 802.11n Modulation
and Coding Scheme (MCS) described in
Table 140 on page 338.
Rate Sets Basic Specifies the basic rate set that the access point
requires to the AP clients. The access point does
not allow to connect to an AP client that does not
support this basic rate set.
Supported Specifies the rates that the access point supports.
Table 139. Access Point Profile Radio Configuration (Continued)
Field Description