Allied Telesis AT-UWC Series - Manual (Page 91)

Chapter 2: System
91
.
3. Click Submit.
The status is displayed in the File Transfer Status field.
Table 18. Upload File from Controller
Field Description
File Type Select one of the following file types:
 Configuration: Specifies a binary file that
includes graphics used for the captive portal
and network visualization.
 Text Configuration: Specifies a startup
configuration file.
 Error Log: Not supported.
 Buffered Log: Specifies a buffered log file.
 Persistent Log: Specifies a persistent log file
including all persistent log messages.
 Diagnosis Log: Specifies a diagnosis log file.
 ValidAccessPoint DB: Not supported.
Transfer Mode Displays the protocol TFTP, which is the only option.
Server
Address Type Select one of the following types:
 IPv4: Specifies a TFTP server with its IPv4
address.
 DNS: Specifies a TFTP server with its host
name.
Server
Address Enter the IPv4 address or host name of the TFTP
server.
Transfer File
Path Enter the location where you place the file on the
TFTP server. The maximum length is 32 characters
Transfer File
Name Enter the name of the file that you upload from the
WLAN Controller. Spaces and special characters are
not allowed.
Start File
Transfer Check the checkbox to start the file transfer.
File Transfer
Status Displays the progress of the file transfer.