Yaskawa SGDB - Manual (Page 504)

SERVO SELECTION AND DATA SHEETS
5.6.17 Cables for Connecting PC and SERVOPACK
494
5.6.17 Cables for Connecting PC and SERVOPACK
Special cables for connecting a PC to a SERVOPACK. Using these cables allows moni-
toring and setting of parameters with a PC.
PC software is available for these communications. Ask your Yaskawa representative for
details. Operate the software as described in the manual supplied.
J Connection Diagram
Rear of PC SERVOPACK
DDK 17LE-13090-27 (D2BC)
Connection Cable DE9405258
(2 m) (6.56 ft) or less
D-Sub 25-pin (Male) or
17JE-23250-02 (DBA) (Made by DDK)
D-Sub 9-pin (Male) or
17JE-23090-02 (DBB) (Made by DDK)
J Dimensional Drawings for Type DE9405258 (for NEC PC)
D-Sub connector 25-pin (Male) 17JE-23250-02 (D8A)
M2.6 screw
Cable (Black) UL2921
0.16 x 7 shielded
cable with 9 lines
Two M3 screws x
10 length, 0.5 pitch
Pin Connector
17JE-23090-02 (D1)
(6.56¦0.164)
Note: Fold the cable shielding back at each end of the cable and secure it with clamps.
J Communications Specifications
• Baud Rate: 9600 bps
• Number of Bits Start: 1 bit
Data: 7 bits
Stop: 1 bit
Parity: 1 bit (even)
• Synchronization Start-Stop
• XON/XOFF Control None
5