Yaskawa SGDB - Manual (Page 210)

4 . 2 Using the Functions
199
7. Press the and keys to operate the mo-
tor.
8. Press DSPL
SET
to revert to . This sets
the servo OFF status (motor power turned
OFF).
(Alternatively, press
JOG
SVON
to set the servo
OFF status.)
9. Press DATA
ENTER
to return to the setting mode dis-
play. This disables operation under Digital Op-
erator control.
For JUSP-OP03A-1
1. Press
MODE/SET
to select the parameter setting
mode.
2. Press the
UP
and
DOWN
keys to select the pa-
rameter number Cn-00.
(Parameter Cn-00 is selected when the power
is turned ON.)
3. Press
DATA
to display the current data for the pa-
rameter Cn-00.
4. Press the
UP
and
DOWN
keys to change the data
to 00.
(This parameter is set to 00 when the power is
turned ON.)
5. Press
MODE/SET
to set the Digital Operator in op-
eration mode. Operation is now possible under
Digital Operator control.
4
Motor runs
forward while
this key is
pressed.
Motor runs
backward while
this key is
pressed.
Motor
Forward
Rotation
Motor
Reverse
Rotation
Setting Mode Display
JUSP-OP03A
Setting Mode
Select Cn-00.
Parameter Number Data
Set to 00-00.
Value changes
rapidly when key
held down.
Display for operation mode from
Digital Operator