Yaskawa SGDB - Manual (Page 440)

SERVO SELECTION AND DATA SHEETS
5.5.2 Order List cont.
430
K17
IP67-based Encoder Connectors on Motor Side
(Purchase Separately)
Receptacle Plug End Bell: Manufactured
by Japan Aviation
Electronics Industry, Ltd.
Back Shell:
Manufactured by Daiichi
Denshi Kogyo K.K.
Cable
Clamp
Manufac-
turer
Qty
Angle
(L-shaped)
Straight
97F3102E20
-29P
MS3106A20
-29S(D190)
CE-20BA-S CE02-20BS-
S
CE3057-12A
-1*
Daiichi
Denshi
Kogyo K.K.
Connector
on motor
side already
provided
To be
selected if
flexible
conduit is
used
Not required if flexible conduit is used * Select an appropriate type
according to the lead wire
diameter. See the table
below.
To be prepared by customer
Note Encoder connectors on SERVOPACK side (2CN) are the same as for K14 .
• Cable clamp types classified according to lead wire diameter
Cable Clamp Type Lead Wire Diameter Range
CE3057-10A-1 Ø10.5µØ14.1
CE3057-10A-2 Ø8.5µØ11.0
CE3057-10A-3 Ø6.5µØ8.7
CE3057-12A-1 Ø12.5µØ16.0
CE3057-12A-2 Ø9.5µØ13.0
CE3057-12A-3 Ø6.8µØ10.0
JL04-2022CK (09) Ø6.5µØ9.5
JL04-2022CK (12) Ø9.5µØ13.0
JL04-2022CK (14) Ø12.9µØ16.0
JL04-2428CK (11) Ø9.0µØ12.0
JL04-2428CK (14) Ø12.0µØ15.0
JL04-2428CK (17) Ø15.0µØ18.0
JL04-2428CK (20) Ø18.0µØ20.0
• When flexible conduit (straight) is used:
Connector Type (Straight) Conduit Type Lead Wire Diameter Range
RCC-106RL-MS32F VF-06 (SR-06) Max. Ø20
RCC-108RL-MS32F VF-08 (SR-08) Max. Ø26
RCC-110RL-MS32F VF-10 (SR-10) Max. Ø35
RCC-112RL-MS32F VF-12 (SR-12) Max. Ø40
RCC-116RL-MS32F VF-16 (SR-16) Max. Ø51
5