Yaskawa SGDB User Manual

Page 407

5.4 Σ -Series Dimensional Drawings

397

*1 The SGMG-55AjA, -75AjA, -1AAjA, -1EAjA, -44AjB, and -60AjB motors do

not contain an End Bell. For these motors, use the following flexible conduit instead.

Connector

Conduit Type

Manufacturer

Angle

(L-Shaped)

Straight

RCC-3::RL-MS32F

RCC-1::RL-MS32F

VF-:: (SR-::)

Nippon Flex Co., Ltd.

Select an appropriate connector and conduit type (mark ::) according to the lead wire di-
ameter. For details, refer to page 430.

Note

1) The connectors for a detector are the same regardless of the motor type being used.

2) To ensure compliance with IP67, always use the plug, End Bell, Back Shell and cable

clamp specified above.

3) Select an appropriate cable clamp type (mark::) according to the lead wire diameter.

For details, refer to page 430.

4) ( ) in the receptacle column shows the standard (non-dripproof) type. However, both are

actually the same receptacles.