HEIDENHAIN TNC 407 (280 580) User Manual - Manual (Page 40)

TNC 425/TNC 415 B/TNC 407 2-2
2 Manual Operation and Setup
e.g.
e.g.
X
Y
together
I
2.1 Moving the Machine Axes
Traversing with the machine axis direction buttons:
Traversing with the machine axis direction buttons depends on the individual machine tool.
See your machine tool manual.
MANUAL OPERATION
Press the machine axis direction button and hold it as long as you
wish the axis to move.
You can move several axes at once in this way.
For continuous movement:
MANUAL OPERATION
Press and hold the machine axis direction button, then press the
machine start button:
The axis continues to move after you release the keys.
To stop the axis, press the machine STOP button.
You can move several axes at a time in this way.