HEIDENHAIN TNC 407 (280 580) User Manual - Manual (Page 24)

TNC 425/TNC 415 B/TNC 407 1-23
1 Introduction
Fig. 1.29: Rotated 3D view
or
or
or
1.4 Graphics and Status Displays
To rotate the 3D view:
Shift the soft-key row.
Rotate the workpiece in 27° steps around the vertical axis.
The current angular attitude of the display is
indicated at the lower left of the graphic.
To switch the frame overlay display on/off:
Show or omit the frame overlay of the workpiece blank form.