HEIDENHAIN TNC 407 (280 580) User Manual User Manual
Page 353
12-9
12
Tables and Overviews
TNC 425/TNC 415 B/TNC 407
Configuration of tool pocket table; column number in the tool table for
(do not execute: 0)
MP7267.0
Tool number – T:
0 to 5
MP7267.1
Special tool – ST:
0 to 5
MP7267.2
Fixed pocket – F:
0 to 5
MP7267.3
Pocket locked – L:
0 to 5
MP7267.4
PLC – Status – PLC:
0 to 5
MANUAL OPERATION: Display of feed rate
MP7270
Display feed rate F only if a machine axis direction button depressed:
0
Display feed rate F even if no machine axis direction button depressed
(feed rate of "slowest" axis):
1
Decimal character
MP7280
Comma:
0
Point:
1
Position display in the tool axis
MP7285
Display referenced to tool datum:
0
Display referenced to tool face:
1
Display step for the X axis
MP7290.0
0.1 mm:
0
0.05 mm:
1
0.01 mm:
2
0.005 mm:
3
0.001 mm:
4
0.0005 mm:
5
0.0001 mm:
6
Display step for the Y axis
MP7290.1
0.1 mm:
0
0.05 mm:
1
0.01 mm:
2
0.005 mm:
3
0.001 mm:
4
0.0005 mm:
5
0.0001 mm:
6
Display step for the Z axis
MP7290.2
0.1 mm:
0
0.05 mm:
1
0.01 mm:
2
0.005 mm:
3
0.001 mm:
4
0.0005 mm:
5
0.0001 mm:
6
TNC displays, TNC editor