HEIDENHAIN TNC 407 (280 580) User Manual User Manual
Page 356
12-12
12
Tables and Overviews
TNC 425/TNC 415 B/TNC 407
Machining and program run
Cycle 17: Oriented spindle stop at beginning of cycle
MP7160
Perform spindle orientation:
0
Do not perform spindle orientation:
1
Cycle 6 ROUGH-OUT: Define behavior
MP7420
Mill channel around contour in clockwise direction for islands and
counterclockwise direction for pockets:
+0
Mill channel around contour in clockwise direction for pockets and
counterclockwise direction for islands:
+1
First mill the channel, then rough-out:
+0
First rough-out, then mill the channel:
+2
Merge compensated contours:
+0
Merge uncompensated contours:
+4
Complete one process for all infeeds before
switching to the other process:
+0
Mill the channel and rough-out for each infeed
depth before continuing to the next depth:
+8
Overlap factor for cycle 4 POCKET MILLING and cycle 5 CIRCULAR POCKET
MP7430
0.1 to 1.414
Circular path tolerance (permissible distance of end point from perfect circle)
MP7431
0.0001 to 0.016 [mm]
Behavior of various M functions
MP7440
Stop program run with M06:
+0
Do not stop program run with M06:
+1
No cycle call with M89:
+0
Modal cycle call with M89:
+2
Stop program run with M functions:
+0
Do not stop program run with M functions:
+4
Kv factors no switchable with M105 and M106:
+0
Kv factors switchable with M105 and M106:
+8
Feed rate reduction in tool axis with M103 F.. not active:
+0
Feed rate reduction in tool axis with M103 F.. active:
+16
The Kv factors are set by the machine manufacturer. He can provide more information.
Angle of change in direction still traversed at constant contouring speed (corner with R0, inside
corner also radius-compensated)
Valid for operation with servo lag and feed forward control
MP7460
0.0000 to 179.9999 [°]
Reference for datums from datum table
MP7475
Referenced to workpiece datum:
0
Referenced to machine datum:
1
1
1
1
1