HEIDENHAIN TNC 407 (280 580) User Manual User Manual
Page 350

12-6
12
Tables and Overviews
TNC 425/TNC 415 B/TNC 407
Probing direction for measuring the radius with TT 110
MP6505
Positive probing direction in the angle reference axis (0° axis):
0
Positive probing direction in the +90° axis:
1
Negative probing direction in the angle reference axis (0° axis):
2
Negative probing direction in the +90° axis:
3
Probe feed rate for second measurement with TT 110, stylus shape, corrections in TOOL.T
MP6507
Calculate probe feed rate for second measurement w/ TT 110, with constant tolerance:
+0
Calculate probe feed rate for second measurement w/ TT 110, with variable tolerance:
+1
Constant probe feed rate for second measurement with TT 110:
+2
TT 110 with cylindrical stylus:
+0
TT 110 with cubic stylus:
+64
Automatically send measuring results to TOOL.T:
+0
Do not correct TOOL.T:
+128
Maximum permissible error when measuring rotating tool with TT 110
Required for calculation of the probe feed rate in connection with MP6570.
MP6510
0.001 to 0.999 [mm] (recommended: 0.005 mm)
Probe feed rate for TT 110 for stationary tool
MP6520
10 to 3000 [mm/min]
Radius measurement with TT 110: Distance from lower edge of tool to upper edge of stylus
The entered value is added to the value entered under TT: L-OFFS in the tool table
MP6530
0.0001 to 9999.9999 [mm]
Clearance zone around TT 110 for pre-positioning
MP6540
0.0001 to 9999.9999 [mm]
Rapid traverse for TT 110 in probe cycle
MP6550
10 to 10 000 [mm/min]
M function for spindle orientation when measuring single cutting edges with TT 110
MP6560
0 to 88
Permissible rotational speed at circumference of milling tool when measuring rotating tools
MP6570
40.000 to 120.0000 [m/min]
REF coordinates of stylus center of TT 110
MP6580.0
X axis:
–99 999.9999 to 99 999.9999 [mm]
MP6580.1
Y axis:
–99 999.9999 to 99 999.9999 [mm]
MP6580.2
Z axis:
–99 999.9999 to 99 999.9999 [mm]
3D touch probes and digitizing