beautypg.com

HEIDENHAIN TNC 407 (280 580) User Manual User Manual

Page 226

background image

8-19

8

Cycles

TNC 407/TNC 415 B/TNC 425

Fig. 8.14:

Example of an SL contour: A, B = pockets; C, D = islands

8.3

SL Cycles (Group I)

.

.

.

.

.

.

A

B

D

C

CONTOUR GEOMETRY (Cycle 14)

Application

All subprograms that are superimposed to define
the contour are listed in cycle 14 CONTOUR
GEOMETRY.

Input data

Enter the LABEL numbers of the subprograms.
Up to 12 label numbers can be defined.

Activation

Cycle 14 is immediately effective upon definition.

Example:

TOOL DEF 3 L+0 R+3.5
TOOL CALL 3 Z S1500 ............................................... Machining plane perpendicular to Z axis
CYCL DEF 14.0 CONTOUR GEOM.
CYCL DEF 14.1 CONTOUR LABEL 1/2/3

L Z+100 R0 FMAX M2

LBL 1 .......................................................................... First contour label of cycle 14 CONTOUR GEOMETRY
L X+0 Y+10 RR F150 M3 ........................................... Machining in the X/Y plane
L X+20 Y+10
CC X+50 Y+50