HEIDENHAIN TNC 407 (280 580) User Manual - Manual (Page 305)

TNC 425/TNC 415 B/TNC 407 9-38
9 3D Touch Probe Systems
e.g. 0
ENT
5
Resulting NC blocks:
TCH PROBE 18.0 LINE
TCH PROBE 18.1 DIRECTN: X
ANGLE: 0 HEIGHT: 25
TCH PROBE 18.2 F1000
MIN.L.SPAC: 0.2 L.SPAC: 0.5
PP.INT: 0.5 TOL: 0.1
e.g. 0
ENT
1
Before cycle 18: LINE, the program must have a range defined in cycle 5: RANGE or cycle 15: RANGE (TABLE).
.
.
.
9.4 Digitizing with a Measuring Touch Probe
MAX. PROBE POINT DISTANCE ?
Enter the maximum probe point interval, for example 0.5 mm.
TOLERANCE ?
Enter the diameter of the tubular tolerance zone, e.g. 0.1 mm.