HEIDENHAIN TNC 407 (280 580) User Manual - Manual (Page 355)

12-11
12 Tables and Overviews
TNC 425/TNC 415 B/TNC 407
12.1 General User Parameters
TNC displays, TNC editor
Graphic simulation without programmed tool axis: Tool radius
MP7315 0 to 99 999.9999 [mm]
Graphic simulation without programmed tool axis: Penetration depth
MP7316 0 to 99 999.9999 [mm]
Graphic simulation without programmed tool axis: M function for start
MP7317.0 0 to 88 (0: function inactive)
Graphic simulation without programmed tool axis: M function for end
MP7317.1 0 to 88 (0: function inactive)
Size of program memory for blockwise transfer
MP7228.0 Minimum memory to be used: 1 to 1024 [kilobytes]
MP7228.1 Maximum memory to be used: 1 to 1024 [kilobytes]
Effect of cycle 11 SCALING FACTOR
MP7410 Scaling factor effective in 3 axes: 0
Scaling factor effective only in working plane: 1
Tool compensation data in probe cycle TOUCH PROBE 0
MP7411 Current tool data are overwritten by calibrated data from 3D touch probe: 0
Current tool data are retained: 1