Rockwell Automation FactoryTalk View Site Edition Users Guide - Manual (Page 626)

F ACTORY T ALK V IEW S ITE E DITION U SER ’ S G UIDE
23–30
• •
•
•
•
Using the arrow keys
You can use the arrow keys on the keyboard to perform some of the same functions as the
mouse and VCR-style buttons.
Printing the trend chart
To print the trend chart
1. Right-click the trend, and then select Print Trend.
Using overlays at run time
Before you can use overlays at run time, a snapshot must be created and the overlay must
be set up in the Overlays tab. For more information about snapshots and overlays, see
“Setting up snapshots and overlays” on page 23-19.
To align an overlay to the left of the trend chart
 Right-click the trend chart, select Overlays > Align Left > the name of the overlay to
align to the left of the trend chart.
To relocate an overlay
 Right-click the trend chart, select Overlays > Relocate > the name of the overlay to
relocate.
To do this
Press and hold
this key And then press
this arrow key
Move back half a time span. (none) Left
Move forward half a time span. (none) Right
Pan up 10%. (none) Up
Pan down 10%. (none) Down
Move back a full time span. Shift Left
Move forward a full time span. Shift Right
Switch to the next pen’s y-axis. Shift Up or Down
Move the value bar to the next data
point. Ctrl Left or Right
Pan up or down 10%. Ctrl Up or Down
Pause. Shift and Ctrl Left or Right
Switch to the next pen’s y-axis. Shift and Ctrl Up or Down