Rockwell Automation FactoryTalk View Site Edition Users Guide - Manual (Page 461)

17 • C REATING GRAPHIC OBJECTS
17–19
•
•
•
• •
17
•
Pla
ceho
lde
r
Some data servers do not impose a minimum or maximum limit on the value of a tag. Set
the upper and lower limits of the ramp push button to limit the range of values the
operator can send to the data server
Setting up ramp push button properties
In the Ramp Push Button Properties dialog box:
 In the General tab, specify the general appearance of the button, the action the button
performs, and whether an audio signal is produced when it is pressed.
 In the Label tab, create a caption and select an image for the button.
 In the Timing tab, set up whether the button action will repeat automatically, when
the operator holds the button down. You can also set up the repeat rate.
 In the Connections tab, specify the tags or the expression the button will use for
transferring data.