Rockwell Automation FactoryTalk View Site Edition Users Guide - Manual (Page 441)

16 • C REATING GRAPHIC DISPLAYS
16–53
•
•
•
• •
16
•
Pla
ceho
lde
r
If you dock a Replace type of display, it will close any other displays running in the same
position. For more about display type, see page 16-42.
Running other displays in the available client area
The size and position of docked graphic displays in the FactoryTalk View SE Client
window determines where in the window other graphic displays can run.
For example, if you dock a display named Menu at the top of the SE Client window, and
then run a display named Line1, it will run in the area not occupied by the docked display.
If Line1 is larger than the available client area, scroll bars will be provided for gaining
access to the hidden portion of the display. If you opened Line1 first, and then ran the
Menu display with a docking parameter, Line1 would be repositioned in the client
window, to accommodate the Menu display.
In the following illustration, the FactoryTalk View SE Client window contains three
docked menus (top, left, and bottom), and a graphic display named Primary Treatment is
running in the available client area.
The menu at the top
was docked initially,
when the FactoryTalk
View SE Client started.
The languages (left)
and navigation (bottom)
menus were docked in
that order, by clicking
buttons on the initial
display.
The Primary Treatment
display was opened
from the navigation
menu.