Rockwell Automation FactoryTalk View Site Edition Users Guide - Manual (Page 248)

F ACTORY T ALK V IEW S ITE E DITION U SER ’ S G UIDE
11–36
• •
•
•
•
 Out of Alarm and Fault State messages.
For details about options in the Colors dialog box, click Help.
Selecting buttons
In the Buttons dialog box, you can specify where in the HMI tag alarm summary the
button bar will be positioned, and which buttons it will contain.
For descriptions of the individual buttons, see the FactoryTalk View Site Edition Help.
To select the buttons for an HMI tag alarm summary
1. In the alarm summary editor, on the Format menu, click Buttons.
2. In the Buttons dialog box, select the check box beside each button that is to be in the
alarm summary. To leave a button out, clear the check box.
To position the button bar
1. In the alarm summary editor, from the Format menu, select Button Bar Position.
2. Select a location.
In the following illustration, the button bar is on the left:
.
You can provide Filter and Sort buttons for the operator to use at run time. You can also set up
sorting and filters for the alarm summary at design time. The result of the design-time filter or sort
operation is retained each time the alarm summary is activated at run time. For more information,
see “Choosing the data to show” on page 11-37