Rockwell Automation FactoryTalk View Site Edition Users Guide - Manual (Page 595)

22 • S ETTING UP DATA LOGGING
22–17
•
•
•
• •
22
•
Pla
ceho
lde
r
 In the Events editor, type the DataLogOn <component> command in the Action box
for an event.
 At the command line in FactoryTalk View Studio, or the FactoryTalk View SE
Administration Console, type DataLogOn <component> and then press Enter.
Ways to stop data logging
To stop data logging only, use one of these methods:
 Use the DataLogOff <component> command (where <component> is the name of
the data log model) to stop a single model. To stop all data log models, use the
DataLogOff * command.
 In the Graphics editor, create a button object, and then specify DataLogOff
<component> or DataLogOff * as the button’s press action. When the button is
pressed, the command runs.
 In the Graphics editor, create a graphic object and attach touch animation to it, using
DataLogOff <component> or DataLogOff * in the Action box. When the object is
touched, data logging is stopped for the specified model.
 In the Events editor, specify DataLogOff <component> or DataLogOff * as the
action for an event.
 At the command line in FactoryTalk View Studio, or the FactoryTalk View SE
Administration Console, type DataLogOff <component> or type DataLogOff * and
then press Enter.
You can also stop data logging by stopping all HMI server components running on the
computer. For details, see “To stop HMI server components manually” on page 6-19.