Rockwell Automation FactoryTalk View Site Edition Users Guide - Manual (Page 152)

F ACTORY T ALK V IEW S ITE E DITION U SER ’ S G UIDE
7–8
• •
•
•
•
When you delete an area, HMI servers and data servers located in the area are not
deleted from disk.
Adding an HMI server
After you create a network station application, you must add one HMI server, either to the
application’s root area, or to the area you have added.
A network station application can contain one and only one HMI server.
To add an HMI server
1. In FactoryTalk View Studio, in the Explorer window, right-click the application root
or right-click an area name, select Add New Server > HMI Server.
2. In the Add HMI Server wizard, in the Select Operations window, click one of the
following options:
 Create a new HMI server . When you create an HMI server, the server’s HMI
project is created automatically.
 Copy an HMI server that already exists. After you have copied an HMI server,
changes made to the original do not affect the copy, or vice versa.
 Import a project from RSView32, FactoryTalk View SE, or FactoryTalk View
Machine Edition, as the basis for the new HMI server. After you have copied a
project, changes made to the original do not affect the copy, or vice versa.