Lenze Engineer v2.21 - Manual (Page 64)

Mapping the system structure in the »Engineer« project
Inserting components
64
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Step 2 - Device modules
• Depending on the selected power supply module, various modules can be inserted into
the Device modules dialog box.
• The device modules assigned to the device are visible.
• Select ... / Delete desired device modules.
6. Click the Next / Complete button to insert the device modules.
7. Step 3 - Other components
Select other components that are to be inserted into the power supply module.
8. Click the Next button.
• The applications for the power supply module selected are displayed.
• If no specific device application has been selected for the device in this step, the
controller will be assigned an "empty" application. The application can be replaced by
another device application later on.  Inserting application ( 55)