Export device description to a lenze package, Lpk file) ( 268), Appendix – Lenze Engineer v2.21 User Manual
Page 268
Appendix
Export data
268
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14.1.2
Export device description to a Lenze package (LPK file)
This function serves to export the device description of a Servo Drive 9400 to a Lenze package file.
• After the package file has been imported to the »EASY Package Manager«, the device
description can be used, for instance, in the »EASY Starter«.
• A device description exported as LPK file can be made available to another user so that he can
use the device description.
[14-2] Export/import device description data package (9400 Servo Drives)
How to export a device description from the »Engineer«:
1. If required:
2. Option:
Download parameter set to device
3. Select the desired Servo Drive 9400 in the project tree.
4. Execute the ExportDevice description package command (available depending on the
device).
• Activate the "Install in the Package Manager" option to automatically install the
package in the »EASY Package Manager« on your computer.
• If the "Install in the Package Manager" option is deactivated, import the desired
package afterwards manually in the »EASY Package Manager«.
5. Select file name/memory location, save file.
Reuse the device description in the »EASY Starter«
The exported LPK file can then be imported into the »EASY Package Manager« (button: Import
package), in order to use the application parameters contained in the »EASY Starter«.
Tip!
• The
»EASY Package Manager« can be found in the Windows info area (next to the
task bar) and under:
ProgramsLenze