Lenze Engineer v2.21 - Manual (Page 148)

Defining the system functionality
Parameterising the application
148
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.9.1.1 Going directly to a parameter dialog
If you want to change to a parameter dialog which is not directly one level higher or lower, you can
use the function "Go directly to the dialog...".
• You can also use this function to have all parameter dialogs for the application displayed in a
hierarchical tree topology.

How to go directly to a parameter dialog:
1. Click the icon in the Application parameters toolbar.
• The Go to the function detail dialog box is displayed:
Tip!
Simultaneously to the display of this dialog box you can carry out further settings on the
Application parameters tab and change to other parameter dialog levels. The accentuation
of the current parameter dialog level in the tree topology also is updated when the
changeover is effected.
2. Select the parameter dialog to be displayed from the hierarchical structure or navigate
through the structure via the Back or Next button.
• The parameter dialog selected in each case is displayed immediately in the Application
parameters tab.
• The dialog box entitled Go to the function detail remains open until the Cancel button is
clicked.