Lenze Engineer v2.21 - Manual (Page 123)

Lenze · Engineer · 2.13 EN - 10/2014
123
Device functions with active online connection
Data logger
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.7.3.2 Saving/exporting a data record
After the variables to be recorded have been selected and the required settings have been entered,
you can save the configuration and recording, if already executed, for future use in the project or
export them to a file.

How to save the data record in the project:
1. Go to the Data logger toolbar and click the icon.
• The Save data record dialog box appears.
2. Enter a name in the Name of the data record to be stored input field.
3. Click the Filing in the project button.
• The dialog box is closed and the current data record is filed in the project.

How to export the data record to a file:
1. Go to the Data logger toolbar and click the icon.
• The Save data record dialog box appears.
2. Enter a name in the Name of the data record to be stored input field.
3. Click the Export to file button.
4. Specify the data record to be stored and the filing folder in the Save as dialog box.
5. Click the Save button.
• The dialog box is closed and the current data record is saved.

Note!
The reuse of a saved configuration is only reasonable for controllers of the same type, as
otherwise due to a scaling of the oscilloscope channels that is not adapted, incorrect
values are displayed!

Note!
The data record will only be saved if you save the whole project.