Lenze Engineer v2.21 - Manual (Page 36)

Getting started: creating a project
Creating a new project
36
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
In the Project view, the Project root together with the name assigned to the project is displayed and,
below the project element, all the previously selected devices are shown in a flat system structure.
Next steps
continue to add items to the system structure now and, for example, convert the flat system
structure into a hierarchical system structure by adding system modules and/or axes to the project.

Stop!
There is now an online connection to the devices which is signalled by the yellow-
highlighted device symbol in the Project view.
If you change parameters in the »Engineer« while the controller is connected online, the
changes will be directly accepted by the controller!
Example 1: Project with 9400 HighLine, to which an online
connection already exists
Example 2: Project with a Controller EL870 and three axes