Lenze Engineer v2.21 - Manual (Page 143)

Lenze · Engineer · 2.13 EN - 10/2014
143
Defining the system functionality
Copying parameter sets
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.7 Copying parameter sets
This function serves to copy a parameter set to a device.
The following parameter sets can be copied:
• Offline parameter set of an »Engineer« project,
• Default setting of a device.

How to copy the parameter sets of a device:
1. Go to the Project view and select the device the parameter sets of which are to be copied.
2. Select the Application data  Copy parameter sets menu command or execute the Copy
parameter sets... menu command via the context menu of the device.
3. Got to the Copy parameter set dialog box and select the parameter sets to be compared
(Source and Target):
[8-3] Copy parameter set: Example EL 870
• The Display option area serves to filter the project view and show only specific
parameters.
4. Click the Copy button.

Note!
• Identical parameter sets cannot be copied to each other.
• Source and target parameter set must not overlap.
• Only offline parameter sets can be copied.