Lenze Engineer v2.21 - Manual (Page 149)

Lenze · Engineer · 2.13 EN - 10/2014
149
Defining the system functionality
Function block editor (FB Editor)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.10 Function block editor (FB Editor)
The applications of devices of the Inverter Drives 8400 and Servo Drives 9400 series (from runtime
software licence Motion Control HighLevel) cannot only be parameterised, but the underlying
function block interconnection can be reconfigured and extended by individual functions (e.g.
process controllers, arithmetic functions, logic modules as well as ramp generators and integrators).
For this purpose, the Workspace provides the FB Editor tab with the function block editor (FB Editor)
for the 8400 and 9400 device series:
[8-5] FB Editor for 8400 StateLine C
[8-6] FB Editor for 9400 HighLine (here in the "Viewer" mode)

Note!
The functionality and the basic image of the FB Editor are different for both device series
(e.g. L-force Servo Drives 9400 and L-force Inverter Drives 8400).
Detailed information on the respective FB Editor can be found in the documentation of
the function library for the corresponding device series.