Lenze Engineer v2.21 - Manual (Page 277)

Lenze · Engineer · 2.13 EN - 10/2014
277
Appendix
Managing cam data with the »Cam Manager«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• A small triangle shows that the data field contains import data:

Tip!
By double-clicking the data field, you can cause the imported curve to be shown in the
»Cam Editor« where you can edit it (for example, expanding, compressing, or applying an
offset).
• Without processing by the »Cam Editor«, »Engineer« transfers the imported grid-
point table to the drive controller without carrying out changes.
14.2.4 DSD export
The interpolation point data can be exported from a data field in the »Cam Manager« for further
use in the Lenze »Drive Solution Designer« (DSD).

How to export data for further use in the DSD:
1. In the context menu (right mouse button) of the data field, select the DSD export
command.
2. Select the desired values and output formats.
3. Click the Optimise button to export the data for further use in the DSD.
After a successful export, the following information is visible:
• File path and name of the exported file.
• The error rate in [%] and the number of points in the curve.