Lenze Engineer v2.21 - Manual (Page 15)

Lenze · Engineer · 2.13 EN - 10/2014
15
User interface
Toolbar
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.1 Toolbar
Via the Toolbar frequently used functions can be accessed without the need to use the menu
commands.

Note!
Depending on the project context, different icons can be activated or are deactivated
(greyed out).
• Some icons, for instance, are only available when a controller is selected.
Icon/button Menu command Function
History of the operating steps (back/next)
- One step forwards or backwards in the history of the
previously selected elements.
 History of the preselected elements ( 19)
-
Managing projects
File  New project...  Updating projects while opening them: Adapting project
file from previous version ( 39)
File  Open...  Opening the project file ( 38)
File  Save  Save a project ( 42)
Configure user interfaces
-  Adapt monitor window: Show parameters graphically
(instruments) ( 25)
- Maximise or minimise workspace
 Workspace ( 21)
Call context help
- Display online help in the context of the selected device
Inserting project elements
Insert  System module  Inserting system modules ( 47)
Insert  Axis  Inserting an axis ( 48)
Insert  Component  Inserting components ( 51)
Insert  Gearbox  Inserting a gearbox ( 67)
Insert  Device module  Inserting device modules ( 57)