Lenze Engineer v2.21 - Manual (Page 259)

Lenze · Engineer · 2.13 EN - 10/2014
259
Menu reference - Overview of the menu commands
"Edit" menu
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13.2 "Edit" menu
Device description package - Export Lenze package file (*.lpk) for the »EASY
Package Manager« (available depending on the
device).
• Output format: Package file (*.lpk)
• The application parameters of a Servo Drive 9400
created in the »Engineer« can thus be displayed in
the »EASY Starter«.
 Export device description to a Lenze package
(LPK file) ( 268)
Application package Export Lenze package file (*.lpk) for the »EASY
Package Manager« (available depending on the
device).
• Output format: Package file (*.lpk)
• The application created in the »Engineer« of an
Inverter Drive 8400 can thus be reused in the
»Engineer«.
 Export applications to a Lenze package (LPK file)
( 267)
L-force Loader file -  Export parameters to a »L-force Loader« (LFL) file
( 269)
Selecting print/information to be printed
Page setup - Define output format for printing the parameter list.
Print preview - Select contents for printing the parameter list
Print + Print the parameter list with the following
information (can be selected separately):
• Project properties
• Parameter values of the individual projected
devices.
Close + Close the »Engineer«.
• If the project is still opened, a dialog window
appears to save the changes.
• This serves to save unsaved changes in the
respective device with mains failure protection.
Icon Command Shortcut Info
Icon Command Shortcut Info
Editing devices/elements in the project tree
Cut +  General editing functions in the project view
( 19)
Copy +
Insertion +
Remove
Rename