Lenze Engineer v2.21 - Manual (Page 228)

Application examples
Interconnection of an I/O terminal with a 9400 HighLine
228
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10 Application examples
In this chapter some examples are used to illustrate the cooperation between applications and
network in the »Engineer«. The examples focus on the connection between process data objects
and ports.
• The examples can be reproduced in offline operation.
10.1 Interconnection of an I/O terminal with a 9400 HighLine
A terminal 16xdig. I/O compact (single-wire conductor) is interconnected to a 9400 HighLine.
• In the FB Editor of the 9400 HighLine the inputs and outputs of the I/O module are provided.

How to interconnect an I/O terminal with the 9400 HighLine:
1. Create the following project tree in the project view:
2. In the Project tree, select the project element T831: 16xdig. I/O compact (single-wire
conductor) and change to the Ports tab.
3. Open the context menu (left-hand mouse button) and use it to copy the output port of the
terminal:
4. Insert the copied output port as the input port into the port editor (Ports) tab of the
9400 HighLine.
5. In the same way, insert the input port of the terminal as the output port into the port editor
of the 9400 HighLine.
6. Select the project element Machine application in the project tree and change to the
Connections tab.